Is the LED on your Netgear wireless range extender flashing red? Did you come across this issue despite doing Netgear extender setup via www.mywifiext.net successfully? Well, that is a cause of worry. But, the good thing is that in this post, you will find every hack required to troubleshoot the issue at hand. Thus, do not waste your breath reading the introduction and get down to the main body of this article. Read the solution for Netgear Extender Red Light issue.

[Resolved] Netgear Extender Red Light Issue

1. Check the Ethernet Connection

Start troubleshooting the issue by checking the Ethernet connection between your Netgear wireless range extender and the host router. Is it weak? Well, that might be because the Ethernet cable connecting the networking devices is worn out. To take care of the problem, you need to replace the worn out cable with a new one. Once done, connect your devices with the help of the new Ethernet cable.

Although this will work for you, on the off chance, it refuses to, then it is recommended that you connect both your devices with the help of a wireless medium.

2. Move the Networking Devices Far

Are you still experiencing the Netgear extender red light issue? Yes? Well, this means that the aforementioned troubleshooting hack was not able to help you out. No problem. This will. Try to create some distance between both your devices, i.e. your Netgear wireless range extender and the host router. Doing so will ensure that their signals are getting transmitted properly and are not clashing unnecessarily.

Also, avoid placing your devices too far from each other. Or else, a bad communication gap will get created between both of them. And you wouldn’t want that now, would you?

3. Eliminate Signal Interference

Another thing that you can do to troubleshoot the Netgear extender red light issue is to get rid of signal interference. You can do so by changing the location of your networking device. While doing so, you need to keep certain surfaces and appliances away from it. Some examples include mirrors, fish tanks, microwave ovens, refrigerators, washing machines, treadmills, and televisions.

Additionally, keep a fair distance between the Netgear wireless range extender and corners as well as thick concrete walls.

4. Update the Extender Firmware for Netgear Extender Red Light Issue

Is the LED on your Netgear wireless rang extender still adamant to turn green? Well, in that case, your device is asking for an update. Thus, do as necessary, i.e. update the firmware of your device to its latest version. You can do so using two methods. In the first method, you need to access the Netgear Nighthawk app and in the second method, you need to access the mywifiext.net web address. While trying to access the web address, if you come across the mywifiext.net not working issue, use the default IP address to log in.

5. Power Cycle the Netgear Extender Red light

Considering you are reading this hack, it means that not even one troubleshooting hack mentioned above helped you to resolve the Netgear extender red light issue. You should try to power cycle or restart your wireless device in that case. This process requires you to turn off your extender, wait for some time, and then, turn it on. Now, check again if the LED on the extender has turned green or not.

In Conclusion

With the hope of helping you fix the Netgear extender red light issue, we are wrapping up this guide. If you are aware of any other hack through which the same issue can be fixed, then it is your responsibility to share it with your fellow readers. You can do so by making use of the comment section.

Read more- HOW YOU CAN TACKLE ARLO WIRELESS CAMERA LOGIN OBSTACLES?