Is your Linksys RE4000W blinking orange? If yes, then relax! You are not alone. Getting blinking orange LED on your Linksys RE4000W WiFi range extender is the most common issue experienced by every 3rd Linksys extender user around the globe. But, you can easily get the issue fixed by applying a few troubleshooting tips outlined underneath. So, without further ado, let’s start over!

Reasons Behind Linksys RE4000W Orange LED

Let us first make you familiar with all the possible reasons behind getting Linksys RE4000W blinking orange issue. Scroll down a little!

• Slow internet

• Linksys RE4000W extender not connected to router

• Your Linksys extender is not running an updated firmware version

• Poor power supply to the Linksys extender

• Improper Linksys RE4000W extender setup

• Bad location of the extender

Fixed: Linksys RE4000W Blinking Orange

Now, let us have a quick look at the fixes to troubleshoot Linksys RE4000W blinking orange light issue in a flash:

Fix 1: The first fix that you have to apply to troubleshoot the issue is to ensure that your Linksys RE4000W WiFi extender and router are properly connected using any Ethernet or a wireless source. Bear in mind, an improper connection between them also leads to the Linksys RE4000W blinking orange light issue. Ensuring an accurate connection between the devices will somehow help you fix the issue.

Fix 2: Still getting the same issue? Need not worry! It means that your Linksys RE4000W WiFi extender is running on an obsolete firmware version. So, to make the most out of the extender, ensure to update the firmware on your Linksys RE4000W extender right now. Simply update the firmware update page of your RE4000W using the correct Linksys extender login credentials and apply the given instructions.

Note: To prevent firmware update failed or corrupted issue, we suggest you – do not interrupt the extender’s firmware update process. This means, do not try to go online, click on any link, turn off your Linksys extender, or disconnect it from your host router. Your Linksys RE4000W extender will reboot automatically once the extender’s firmware update process gets completed.

Fix 3: The third fix to be applied by you is to check the extender’s power supply. What you have to do is to ensure that your extender is getting the proper yet uninterrupted power (electricity) from the wall socket into which your Linksys RE4000W device is plugged.

Fix 4: Still no luck? No worries! It can be due to bad extender placement and technical glitches. So, get rid of this, you are suggested to change the extender’s location right away. Place it (the extender) somewhere higher and in an open area in your home, which should be within reach of your host router. And, to get rid of technical glitches, power cycling Linksys RE4000W extender can be of great help to you. Thus, to power cycle of restart your extender, follow the guidelines provided below:

• Turn off your Linksys RE4000W extender and disconnect it from your router.

• Wait for some time and reconnect your router and the extender.

After applying this fix, see if Linksys RE4000W blinking orange light issue is resolved for you or not.

Fix 5: Last, but not least! Reset your Linksys RE4000W extender. The reason is, chances are that your Linksys extender is not properly configured due to which you are getting the orange light issue. For fixing it, resetting the Linksys RE4000W extender is suggested.

Thus, to reset your Linksys RE4000W WiFi extender, here are the instructions to be applied by you:

• Do not turn off your Linksys RE4000W extender but disconnect it from your router.

• Locate and press the extender’s reset hole and hold it for a couple of seconds.

• Release the extender’s reset hole and configure it from the scratch.

The Final Thoughts

And, with the last troubleshooting tips, our article on how to fix Linksys RE4000W linking orange light issue ends here. Anticipating that these fixes were easy to apply and resolved the issue for you.